640×384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640×384 resolution, with embedded controller, communicating via SPI interface,
supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications
such as shelf label, industrial instrument, and so on.
1. 7.5inch e-Paper (B) x1
2. e-Paper Driver HAT x1
3. RPi screws pack (2pcs) x1
Wiki : www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B)
100% original,offer technical support!
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing; Onboard voltage translator, compatible with 3.3V/5V MCUs
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), download link: www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B)